Download Flyer
PILATUS 1M detector
A powerful combination of large area and high speed for small-angle X-ray scattering

The PILATUS 1M detector is perfectly suited for modern small-angle X-ray scattering (SAXS) applications either in a home lab or at synchrotron light sources, which require fast detectors with ultra low noise and very high dynamic ranges.

It is based on the newly developed CMOS hybrid-pixel technology and operates in “single-photon counting” mode. With its large active area, high dynamic range, high frame rate, the PILATUS 1M is ideally suited for SAXS.

The detector system operates at room temperature, with a cooling unit for temperature stabilization. It comes as a complete system with detector, water cooler, a high-end server to cope with the high data transfer rates and the data acquisition and analysis software package TVX.

The PILATUS 1M is delivered fully calibrated and ready to use.


Applications:

  • X-ray diffraction (XRD)
  • Small-angle scattering (SAXS)
  • Macromolecular crystallography (MX)


Technical specifications

Number of modules 2 x 5 = 10
Sensor Reverse-biased silicon diode array
Sensor thickness 320 µm
Pixel size 172 x 172 µm2
Format 981 x 1043 = 1,023,183 pixels
Area 169 x 179 mm2
Intermodule gap x: 7 pixels, y: 17 pixels, 8.4% of total area
Dynamic range 20 bits (1:1,048,576)
Counting rate per pixel > 2 x 106 X-ray/s
Energy range 3 – 30 keV
Quantum efficiency
(calculated)
3 keV: 80%
8 keV: 99%
15 keV: 55%
Energy resolution 500 eV
Adjustable threshold range 2 – 20 keV
Threshold dispersion 50 eV
Readout time 3.6 ms
Framing rate 30 Hz
Point-spread function 1 pixel
Data formats Raw data, TIF, EDF, CBF
External trigger/gate 5V TTL, 3 different modes
Software interface Through socket connection; clients for EPICS, SPEC and stand-alone operation are available
Cooling Close-circuit water cooling unit for temperature stabilization
Power consumption 100 W
Dimensions (WHD) Approx. 300 x 310 x 458 mm
Weight Approx. 25 kg