Material Science

Typical material science experiments probe the dynamic response of a sample to environmental parameter changes such as pressure, temperature, etc. In other cases, scanning the sample with a small beam over large areas is required to investigate the material’s inhomogeneous regions.

DECTRIS detectors provide fast frame rates, plus the possibility to trigger the detector to external events. For example, our PILATUS3 X CdTe, with its high-energy HPC technology, is essential to get an optimal use of beamtime where smaller beam sizes and higher fluxes at higher energies are provided – e.g. by new sources.

EIGER X 16M

  • More than 18 million pixels
  • Detection area of 311 x 328 mm2
  • Continuous readout
  • 3 microseconds dead time
  • Region-of-interest
  • 133 Hz operation

Read more

EIGER X 9M

  • More than 9 million pixels
  • Detection area of 233 x 245 mm2
  • Continuous readout
  • 3 microseconds dead time
  • Region-of-interest
  • 238 Hz operation

Read more

EIGER X 4M

  • Up to 750 Hz frame rate
  • Optimized for scanning setups
  • Detection area of 155 x 162 mm2
  • Continuous readout
  • 3 microseconds dead time
  • Light construction 15 kg

Read more

EIGER X 1M

  • Up to 3000 Hz frame rate
  • Continuous readout
  • 3 microseconds dead time
  • Detection area of 77 x 79 mm2

Read more

EIGER X 500K

  • Up to 9000 Hz frame rate
  • Continuous readout
  • 3 microseconds dead time

Read more

EIGER S 500K

  • Up to 3000 Hz frame rate
  • Optional vacuum compatibility
  • 3 microseconds dead time

Read more

PILATUS3 X CdTe 2M

  • Efficiency up to 75% at 80 keV
  • More than 2.4 million pixels
  • Large detection area 253 x 288 mm2
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV
  • Region-of-interest
  • 250 Hz operation

Read more

PILATUS3 X CdTe 1M

  • Efficiency up to 75% at 80 keV
  • Up to 500 Hz operation
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV
  • Region-of-interest

Read more

PILATUS3 X CdTe 300K

  • Most universal HPC detector
  • 8 x 10 cm detection area
  • Efficiency up to 75% at 80 keV
  • 500 Hz operation
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV

Read more

PILATUS3 X CdTe 100K-M

  • Detection area 83.8 x 33.5 mm2
  • Lightweight detector head 0.9 kg
  • Efficiency up to 75% at 80 keV
  • High dynamic range with noise-free readout
  • Frame rate up to 500 Hz

Read more

PILATUS3 X 2M

  • More than 2.4 million pixels
  • Large detection area 253 x 288 mm2
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV
  • Region-of-interest
  • 250 Hz operation

Read more

PILATUS3 X 1M

  • Up to 500 Hz operation
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV
  • Region-of-interest

Read more

PILATUS3 X 300K

  • Most universal HPC detector
  • 8 x 10 cm detection area
  • Energy thresholds down to 1600 eV

Read more

PILATUS3 X 200K-A

  • 83 x 70 mm2 detection area
  • Compact and light
  • No need of dry air or water stabilization
  • Up to 500 Hz operation

Read more

PILATUS3 X 100K-A

  • Universal HPC detector
  • Compact and light
  • No need of dry air or water stabilization
  • Up to 500 Hz operation

Read more

PILATUS3 S 2M

  • More than 2.4 million pixels
  • Large detection area 253 x 288 mm2
  • Economic solution
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV

Read more

PILATUS3 S 1M

  • Detection area 168 x 179 mm2
  • Instant retrigger technology
  • 10 million counts per second and pixel at 12 keV

Read more

Newsletter

Sign up in DECTRIS E-Mail Newsletter for news, events, upgrades and special offers.

We assure you that your personal infomation will not be shared with others.