OLD-EIGER2 X CdTe 2M-W

With an active area that is over 300 mm wide, the EIGER2 X CdTe 2M-W allows you to record a large q-range of scattering and diffraction patterns in a single shot. The combination of detector's active area, its frame rate of up to 1,000 Hz and its excellent gating capabilities, makes this X-ray camera perfectly suited for in situ time-resolved experiments. Two million pixels with a point-spread function of one 75 µm pixel ensure high-resolution data, but also a good sampling of points for the azimuthal integration of the powder diffraction patterns or Pair Distribution Function (PDF) analysis. The cadmium-telluride sensor provides excellent sensitivity to high-energy X-rays. This sensor, combined with the fast-counting pixels featuring DECTRIS’ Instant Retrigger technology, will allow you to take full advantage of the high-photon flux offered by modern synchrotron beamlines.

Specifications EIGER2 X CdTe 2M-W

Number of detector modules (W x H)

4 x 1

Active area (W x H)

[

mm²

]

311.1 x 38.4

Pixel size

[

µm²

]

75 x 75

Total number of pixels

4,148 x 512 = 2,123,776

Gap width vertical / horizontal [pixels]*

12 / -

Energy-discriminating thresholds

2

Count-rate capability

[

photons/s/pixel

]

10⁷

Maximum frame rate

[

Hz

]

1,000

Point-spread function

[

pixels

]

1 (FWHM)

Cadmium-telluride sensor thickness [µm]

750

Data format

HDF5 / NeXus

Dimensions (W x H x D)

[

mm³

]

348 x 92 x 277

Weight

[

kg

]

9.7

Photon energy [keV]

Up to 100

* Plus a 2-pixel vertical gap in each module.


All specifications are subject to change without notice.