The PILATUS3 R 100K-A delivers all advantages of Hybrid Photon Counting technology in an easy-to-use, service- and maintenance-free detector system and is DECTRIS’ most affordable 2D detector. A continuous active area of 84 by 34 millimeters allows for fast and accurate measurements of XRD data. Like all its PILATUS3 R siblings, the 100K-A outperforms other counting detectors with a maximum count rate of more than 4 million counts per second and pixel at 8 keV. This ensures accurate data even when measuring strongly diffracting samples with the brightest sources. The radiation-hard design of PILATUS3 has proven its robustness at many synchrotron beamlines and can easily withstand the radiation exposure in laboratory instruments, providing a highly reliable detector. Air-cooled and fully media-free, the PILATUS3 R 100K-A is the easiest-to-operate PILATUS detector yet.
| Number of detector modules (W x H) | 1 x 1 |
|---|---|
| Sensitive area (width x height) [mm²] | 83.8 x 33.5 |
| Pixel size [µm²] | 172 x 172 |
| Total number of pixels | 487 x 195 = 94,965 |
| Gap width: hor. / ver. [pixel] | 0 |
| Inactive area [%] | 0 |
| Defective pixels [%] | < 0.03% |
| Maximum frame rate [Hz] | 20 |
| Readout time [ms] | 7 |
| Point-spread function | 1 pixel (FWHM) |
| Threshold energy [keV] | 3.5 - 18 |
| Energy calibrations | Kα-lines of Cr, Mn, Fe, Cu, Ga, Mo, Ag |
| Maximum count rate [phts/s/pixel] | 1 · 10 ⁷ |
| Counter depth [bit] | 20 bits (1,048,576) |
| Power consumption [W] | 30 |
| Dimensions (W x H x D) [mm³] | 156 x 115 x 284 |
| Weight [kg] | 4.5 |
| Module cooling | Air-cooled |
| Electronics cooling | Air-cooled |
All specifications are subject to change without notice.