The PILATUS3 R 1M is the perfect detector for macromolecular crystallography in the laboratory. The large sensor area of 168.7 x 179.4 mm2 rivals that of image plates and eliminates all compromises when collecting complete high resolution data with well resolved spots. A readout time of 7 ms and shutterless data acquisition make it a breeze to collect high multiplicity data sets.
The PILATUS3 R 1M is an ideal choice when replacing your outdated image plate or CCD and upgrading your diffractometer to a state-of-the-art instrument.
In X-ray scattering experiments, the large area of the 1M enables simultaneous measurements of SAXS and WAXS signals.
| Number of detector modules | 2 x 5 |
|---|---|
| Sensitive area (width x height) [mm²] | 168.7 x 179.4 |
| Pixel size [µm²] | 172 x 172 |
| Total number of pixels | 981 x 1043 = 1,023,183 |
| Gap width: hor. / ver. [pixel] | 7 / 17 |
| Inactive area [%] | 7.2 |
| Defective pixels [%] | < 0.03% |
| Maximum frame rate [Hz] | 5 |
| Readout time [ms] | 7 |
| Point-spread function | 1 pixel (FWHM) |
| Threshold energy [keV] | 2.7 - 18 |
| Energy calibrations | Kα-lines of Cr, Mn, Fe, Cu, Ga, Mo, Ag |
| Maximum count rate [phts/s/pixel] | 1 · 10 ⁷ |
| Counter depth [bit] | 20 bits (1,048,576) |
| Power consumption [W] | 165 |
| Dimensions (WHD) [mm³] | 265 x 286 x 455 |
| Weight [kg] | 25 |
| Module cooling | Water-cooled |
| Electronics cooling | Air-cooled |
All specifications are subject to change without notice.